NILPETER CONVERTER 330mm

NILPETER CONVERTER 330mm
  • Year: 2005
  • Max. Band width 330mm.
  • – Control of infeed tension variations for perfect synchronization with the printing engine.
  • – Unwinder for off-fine finishing with 76mm (3″) expandable shaft and independent tension control.
  • – FIFE Integrated belt guide with ultrasonic sensor
  • – Flexographic station for application of UV varnish with total coverage. Includes rubber roller for printing, driver roller, doctor blade and anylox roller for total coverage (80 L/cm – 15µm – 10-12 grms/m2).
  • – Pre-installation for the laminating station option.
  • – 5kW cold drying UV lamp.
  • – Cooling unit for UV lamp.
  • – Rotary die-cutting station with automatic registration control. Accepts magnetic cylinders between 9″ and 25″. Magnetic cylinders not included.
  • Max. speed 50m/min.
  • – Pre-installation for the digital die option.
  • – Waste stripping and rewinding station with 76mm (3″) expandable shaft and independent tension control.
  • – Longitudinal cutting station with rotary blades type
  • Includes three blades. Prepared for twelve blades.
  • Two rewinders with 76mm (3″) expandable shaft and independent voltage control
  • Register control for flexo station
  • – Servo controlled automatic registration for faster and more accurate adjustment at any repeat distance between 9″-19″.
  • – Longitudinal and transversal register adjustment system.
  • – Auto homming and auto registration system.
  • – Includes 12″ plate cylinder.*
  • ‘The size can be adapted to customer needs.

 

  • Hot air curing system
  • – 12 kW hot air system for acrylic varnishes, inks and primers.
  • – Max. drying speed 50m/min. (this value may vary depending on the type of primer and/or material).
  • – Includes anylox roller for primer (1 0grms/m2).

 

  • Laminating station
  • Laminating station with unwinder and rewinder with independent tension control.
  • – Allows UV lamination, cold lamination, super-varnish or cold stamping • (co/d-foil).
  • ‘Cold stamping requires the registration control option at the flexo station.

 

  • Digital die
  • – Max. die width 330 mm (13″)
  • – Repeat distance 280mm – 558mm
  • – Max. die cutting speed 20-32m/min*
  • – 25″ magnetic cylinder
  • – Prepared for pressure gauge installation. “May vary based on repeat distance
  • and from the number of figures to the advance.

 

  • ACCESSORIES Coil elevator
  • – Includes adapter to raise the magnetic cylinders. Cutter and stacker module
  • – Can be used online or offline.*
  • – Allows three cutting modes: space between labels, predefined distance or mark reading.
  • – Cutting length 10-9999mm.
  • – Accuracy +/-0.15mm.
  • – Speed 30m/min (minimum cutting length 150mm).
  • *Cut length may limit the speed of the finishing system if using the in-line cutter/stacker.

 

  • Slitting Blades
  • Allows a maximum of twelve

 

  • 12″ rubber roller for flexographic station

Description

NILPETER CONVERTER 330mm
  • Year: 2005
  • Max. Band width 330mm.
  • – Control of infeed tension variations for perfect synchronization with the printing engine.
  • – Unwinder for off-fine finishing with 76mm (3″) expandable shaft and independent tension control.
  • – FIFE Integrated belt guide with ultrasonic sensor
  • – Flexographic station for application of UV varnish with total coverage. Includes rubber roller for printing, driver roller, doctor blade and anylox roller for total coverage (80 L/cm – 15µm – 10-12 grms/m2).
  • – Pre-installation for the laminating station option.
  • – 5kW cold drying UV lamp.
  • – Cooling unit for UV lamp.
  • – Rotary die-cutting station with automatic registration control. Accepts magnetic cylinders between 9″ and 25″. Magnetic cylinders not included.
  • Max. speed 50m/min.
  • – Pre-installation for the digital die option.
  • – Waste stripping and rewinding station with 76mm (3″) expandable shaft and independent tension control.
  • – Longitudinal cutting station with rotary blades type
  • Includes three blades. Prepared for twelve blades.
  • Two rewinders with 76mm (3″) expandable shaft and independent voltage control
  • Register control for flexo station
  • – Servo controlled automatic registration for faster and more accurate adjustment at any repeat distance between 9″-19″.
  • – Longitudinal and transversal register adjustment system.
  • – Auto homming and auto registration system.
  • – Includes 12″ plate cylinder.*
  • ‘The size can be adapted to customer needs.

 

  • Hot air curing system
  • – 12 kW hot air system for acrylic varnishes, inks and primers.
  • – Max. drying speed 50m/min. (this value may vary depending on the type of primer and/or material).
  • – Includes anylox roller for primer (1 0grms/m2).

 

  • Laminating station
  • Laminating station with unwinder and rewinder with independent tension control.
  • – Allows UV lamination, cold lamination, super-varnish or cold stamping • (co/d-foil).
  • ‘Cold stamping requires the registration control option at the flexo station.

 

  • Digital die
  • – Max. die width 330 mm (13″)
  • – Repeat distance 280mm – 558mm
  • – Max. die cutting speed 20-32m/min*
  • – 25″ magnetic cylinder
  • – Prepared for pressure gauge installation. “May vary based on repeat distance
  • and from the number of figures to the advance.

 

  • ACCESSORIES Coil elevator
  • – Includes adapter to raise the magnetic cylinders. Cutter and stacker module
  • – Can be used online or offline.*
  • – Allows three cutting modes: space between labels, predefined distance or mark reading.
  • – Cutting length 10-9999mm.
  • – Accuracy +/-0.15mm.
  • – Speed 30m/min (minimum cutting length 150mm).
  • *Cut length may limit the speed of the finishing system if using the in-line cutter/stacker.

 

  • Slitting Blades
  • Allows a maximum of twelve

 

  • 12″ rubber roller for flexographic station

Additional information

Colours

Type Machine

Video